I--- Download Driver Cutting Plotter Jinka 1351 [patched] Jun 2026

Most budget-friendly Chinese cutting plotters rely on an internal USB-to-Serial converter chip. Your computer will not recognize the cutter without this bridge driver.

| Step | Action | Status | | :--- | :--- | :--- | | 1 | CH341 driver installed (check Device Manager) | ✅ / ❌ | | 2 | Jinka 1351 powered ON before USB connection | ✅ / ❌ | | 3 | USB cable length < 2 meters | ✅ / ❌ | | 4 | Software COM port matches Device Manager (e.g., COM3) | ✅ / ❌ | | 5 | Baud rate = 9600 in both plotter menu and software | ✅ / ❌ | | 6 | Test cut sent from software, not from Windows printer | ✅ / ❌ |

Once you have installed a USB driver (either from the CD or a generic GoldCut driver), you need to see which COM port Windows assigned to the plotter. Go to Device Manager and expand the "Ports (COM & LPT)" section. Look for an entry like "USB Serial Port" or "CH341".

: Download the driver package and extract it using a tool like : Open the folder and double-click i--- Download Driver Cutting Plotter Jinka 1351

To help tailor further troubleshooting or configuration steps, let me know:

The is a reliable workhorse in the vinyl cutting industry. However, finding the correct driver for modern operating systems like Windows 10 or Windows 11 can be a challenge. If your computer fails to recognize the plotter via USB, or if the cutter performs erratic movements, you likely need to update or reinstall the driver. This page provides a direct download link for the Jinka 1351 driver, along with a step-by-step installation guide to get your machine back to work.

When downloading drivers from third-party websites, always use caution. Verify the file's safety with a reputable antivirus program. Some websites may bundle unwanted software or malware with the driver. User comments on some forums mention that they have scanned the files and found them clean with various antivirus software, but it's always best to be vigilant. Most budget-friendly Chinese cutting plotters rely on an

Ultimate Guide: How to Download and Install Jinka 1351 Cutting Plotter Drivers

To download the driver for your Cutting Plotter Jinka 1351, follow these steps:

Lower the Baud Rate setting in both Device Manager and your software to 9600. Ensure you are using a high-quality, shielded USB cable under 3 meters in length. Software Says "Cannot Open Port" Go to Device Manager and expand the "Ports

: Before installing, open Device Manager on your PC and uninstall any existing "USB Serial Port" or "Plotter Controller" entries to avoid port conflicts.

Error: "Device Descriptor Request Failed" or Unknown USB Device

Getting your Jinka 1351 cutting plotter to communicate perfectly with your computer requires the correct driver. Without the proper USB-to-serial communication driver, your design software will fail to recognize the machine, leading to cut errors or a complete lack of response.

Getting your Jinka 1351 cutting plotter to communicate perfectly with your computer requires the correct driver. Without the proper USB-to-serial communication driver, your design software will fail to recognize the machine, resulting in transmission errors or unresponsive hardware.

Select as the manufacturer and choose your specific model designation (e.g., JK-1351 , XE-1351 , or Jinka-ARMS V3 ).