Once the stream is live over your network, the final phase involves pairing your physical assets inside the GpsGate or tracking application backend . Setup Step Required Input Click Custom Asset / Add Device Registers a new container in the tracking matrix. Identity Validation Input the Tracker’s unique IMEI or Serial Number Ensures data mapping routes to the exact physical unit. Profile Assignment Choose Device Driver/User Type

Some campuses streamline the GPSUINET deployment by offering a configuration profile tool, such as or SecureW2 . If your university provides an onboarding portal:

Here are some features related to GPSUINet setup:

To install the software correctly, you have local administrator privileges on the client computer. This is necessary for writing to protected directories (like C:\GPS ) and the Windows Registry. If you don't have these rights, contact your IT department.

Once GPS-Suite is up and running, follow these best practices to ensure stability and security:

⚠️ Disable antivirus temporarily if the driver installation is blocked.

Input the hardware's unique to authenticate the incoming data stream. Step 4: Point Hardware to the Target Server IP and Port

Run the command line as Administrator:

Once connected to the signal, your device must be "authorized" to access the broader internet. Connect to Captive Portal - GL.iNet Router Docs 3

Relocate the antenna module to provide an unobstructed view of the sky.

Click the in the menu bar at the top right of your screen. Select GPSUINET from the network list.

: Turn on master control successfully or SQ, master register OK . This binds your phone number as the primary administrator authorized to configure the hardware. Step 2: Configure the APN (Access Point Name)