All production welding must be carried out in accordance with a written Welding Procedure Specification (WPS). The WPS outlines critical parameters including: Welding process type (e.g., MMA/111, MAG/135) Consumable classifications (electrodes, shielding gases)
Reduced risk of catastrophic failure in concrete connections.
ISO 4063 (Welding processes), EN 10080 (Reinforcing steel), and ISO 3834 (Quality requirements). Core Requirements Covered in the PDF 1. Permitted Welding Processes
: The 2006 version is the standard, available for purchase through ISO, BSI, or ANSI. en iso 176601 pdf
In practice, EN ISO 17660 is often cited alongside other standards. For instance, in the European Union, it complements , the standard for steel and aluminum structures, ensuring that welding activities on reinforcing steel meet the required quality levels.
The standard requires destructive (e.g., tensile testing, bend tests) and non-destructive testing (NDT) to verify that the joints meet the mechanical and chemical requirements. Why Adhere to EN ISO 17660-1?
The standard can be purchased directly from ISO.org . All production welding must be carried out in
Which would you like?
To check for external defects like cracks or undercuts.
The standard details several, specific structural joint configurations, including butt joints, lap joints, strap joints, and cross joints. Core Requirements Covered in the PDF 1
As a result, certification schemes for both companies (welding contractors) and personnel (welders) are frequently based on the requirements of the EN ISO 17660 series. This ensures that all parties involved in the welding of reinforcing steel are qualified and operate according to a recognized standard of quality and safety.
It includes joints between reinforcing bars and other steel components like insert anchors or connection devices.
The standard mandates the appointment of a (in accordance with ISO 14731). The coordinator's technical knowledge level (Basic, Specific, or Comprehensive) depends on the complexity of the welding operations and the diameter of the reinforcing bars being used. Testing and Inspection (NDT and Destructive)