Protea 4.8 [work]: Software Dlms Ashly
Manage noise floor and automatic gain control. 4. System Delay and Alignment
With this information, I can provide tailored troubleshooting steps or guide you through creating your exact crossover matrix. Share public link
The software communicates with hardware via:
Before diving into software, let’s recap the hardware. The Protea 4.8 is a 1U DSP unit designed for system processing. It handles:
If you are looking for specific troubleshooting help or setting up a new 4.8SP unit, let me know if you need assistance with: the hardware via USB/RS-232 Setting up initial crossover slopes Creating a preset for a particular room software dlms ashly protea 4.8
Turn on the Ashly 4.8SP hardware first, then launch the Protea Software on your computer. Step 3: Com Port Assignment
Version 4.8 is engineered to support a wide range of Ashly devices, including:
Set HPF to 35Hz (Linkwitz-Riley 24dB/octave) to protect against subsonic frequencies. Set LPF to 90Hz (Linkwitz-Riley 24dB/octave). Mid-Range (Out 3 & 4): Set HPF to 90Hz. Set LPF to 1.6kHz.
While genuine Ashly Protea software is designed for authentic Ashly hardware, some users have reported that the official software can work with certain non-original 4.8SP units. Manage noise floor and automatic gain control
: While the hardware stores up to 30 presets, using the software enables greater preset capacity by saving files directly to a PC (using the .pne extension). It also supports loading legacy .pcc files from older models like the 4.24C.
To manage your 4.8SP processor, you will need a Windows-based PC and the proper software package. System Requirements
A clear graphical grid makes routing any input (or mix of inputs) to any output exceptionally simple.
Ultimate Guide to Ashly Protea 4.8SP DLMS Software: Setup, Configuration, and Tips Share public link The software communicates with hardware
You can assign Input A to Outputs 1, 2, and 3 simultaneously for a 3-way crossover.
The Protea 4.8SP offers two primary methods for PC connectivity:
Located on the rear panel, this is ideal for permanent installations, long cable runs, or linking multiple units together via a standard data network. 3. Establishing Communication Power on the Ashly 4.8SP hardware. Connect the USB or RS-232 cable to your PC. Launch the Protea Software.