Firmware Version Dwr-m960-v1.1.49 ((free)) «GENUINE»
On , D-Link was informed by a third-party security researcher of a significant vulnerability affecting D-Link DWR-M960 routers, specifically hardware revision Ax, that were running firmware version v1.1.49 and below.
Look at the sticker on the underside of your router. Ensure you download firmware specifically for your hardware revision (e.g., Ax or Bx), as using the wrong file can "brick" the device.
Never perform a firmware installation over Wi-Fi. A sudden drop in wireless signal can corrupt the flash memory and brick your router permanently.
is a critical operating system patch specifically developed for the D-Link DWR-M960 4G AC1200 LTE Router (Hardware Revision Ax) . Maintaining up-to-date firmware ensures that your home or office router runs with the latest connectivity enhancements, performance optimizations, and security patches. firmware version dwr-m960-v1.1.49
Complete Guide to D-Link DWR-M960 Firmware Version dwr-m960-v1.1.49: Security and Performance Improvements
This version sits between the older, problematic v1.1.38 and the newer v1.2.0 series. It is but a full production release that D-Link pushed out as a stability and security patch.
| CVE ID | Component/Function | Nature of Vulnerability | | :--- | :--- | :--- | | | WLAN Encryption Configuration ( /boafrm/formWlEncrypt ) | Stack-based buffer overflow through submit-url argument | | CVE-2026-2929 | Wireless Access Control ( /boafrm/formWlAc ) | Stack-based buffer overflow through submit-url argument | | CVE-2026-2855 | DDNS Settings Handler ( /boafrm/formDdns ) | Stack-based buffer overflow through submit-url argument | | CVE-2026-2856 | Filter Configuration Endpoint ( /boafrm/formFilter ) | Stack-based buffer overflow | | CVE-2026-2958 | formWsc Endpoint | Stack-based buffer overflow | On , D-Link was informed by a third-party
If you experience anomalies after flashing firmware version DWR-M960-V1.1.49, utilize these standard troubleshooting techniques. No Internet Connectivity (LTE or WAN)
, if you are currently on a version lower than v1.1.49, you should update immediately due to the security risks associated with earlier builds. However, if your router supports it, check for v1.1.51 , which succeeded this version with further stability improvements. How to Install
Always use an Ethernet cable to connect your computer to the router during the update. Do not attempt this over Wi-Fi. Upload Firmware: Open your browser and go to 192.168.0.1 (default). Log in (default is often admin / admin ). Never perform a firmware installation over Wi-Fi
To check and update the firmware on your D-Link DWR-M960 router:
feature that switches between mobile broadband and fixed-line internet to maintain a constant connection. Security Tools:
The D-Link DWR-M960 is a reliable 4G AC1200 LTE router that serves as a lifeline for users in areas with limited broadband access. To maintain peak performance, security, and connectivity, keeping the system updated is vital. The release of firmware version DWR-M960-V1.1.49 marks a significant stability update for this hardware. Why Firmware Updates Matter
This article provides a comprehensive overview of the for the D-Link DWR-M960 4G AC1200 LTE Router (Hardware Revision Ax)
The issue with v1.1.49 is not an isolated incident. A deeper analysis of the DWR-M960 shows that multiple firmware versions, particularly , have been plagued by a series of severe vulnerabilities reported in recent years. These include numerous stack-based buffer overflow vulnerabilities. Attackers can potentially exploit these flaws to execute arbitrary code on your router or cause a Denial of Service (DoS), rendering the device useless. The German Federal Office for Information Security (BSI) has issued warnings about these issues, highlighting the urgent need for updates.