Gordak 952 Service Manual =link= Jun 2026

Do you have a on hand to take basic voltage and resistance readings? Share public link

The is a professional 2-in-1 ESD-safe soldering and hot air rework station commonly used for SMD electronics repair, such as QFP, PLCC, SOP, and BGA components. A service manual or detailed technical guide for this unit typically includes information on safety, assembly, part identification, and maintenance procedures. Key Specifications

Internal Diaphragm Pump (driven by an AC motor)

: After shutdown, an intelligent auto-cooling system continues blowing air until the temperature drops below on some models) to protect internal components. Heating Elements Gordak 952 Service Manual

Following proper usage protocols can significantly extend the life of your Gordak 952:

The Gordak 952 is a classic, widely used dual-function SMD rework station that combines a hot air gun and a soldering iron. It is heavily favored by electronics hobbyists, repair technicians, and engineers for its affordability and standard through-hole component design, making it highly repairable.

Take off the screws securing the top metal cover. Do you have a on hand to take

Check all internal silicone tubing connections for tight seals and clear pathways. Calibration Procedure

Driven by an AC speed controller linked to the front panel potentiometer.

The TRIAC control circuit for the 250W hot air gun heating element. Key Specifications Internal Diaphragm Pump (driven by an

Are you dealing with an or a digital LED display version?

Soak hot air nozzles in isopropyl alcohol to remove carbon buildup.

If you buy a generic 858D handle, repin according to this table.