The Levant rail mounts directly to the stair treads, never to the wall.
| Warning Symbol | Description | |----------------|-------------| | ⚡ | Disconnect battery AND AC power before servicing motor/controller. | | ⚠️ | Never install on stairs with less than 32 inches (813 mm) clear width between handrails. | | 🔧 | Only use ThyssenKrupp-specified rail lubricant (PN 190042). | | 🚫 | Do not modify limit switch positions without re-validating braking distance. |
The ThyssenKrupp Levant features several integrated safety mechanisms that must be tested individually before anyone rides the lift. Safety Feature Test Procedure Expected Result Depress the edges of the footrest while driving the lift. The lift must stop immediately. Carriage Shroud Sensors thyssenkrupp levant stair lift installation manual full
The Levant operates on DC battery power and charges continuously at designated landing points.
Insert the internal alignment bars (splice plates) into the channels of the first rail section. The Levant rail mounts directly to the stair
The drive carriage is heavy and contains the motor and gearbox. Use caution when lifting it onto the rail.
While many homeowners successfully install the ThyssenKrupp Levant themselves, may require a licensed technician for inspection. Improper installation can void warranties and pose a significant fall risk. If you encounter resistance or are unsure about the structural integrity of your stairs, consult a professional. | | 🔧 | Only use ThyssenKrupp-specified rail
Remove the temporary end-stops from the top (or bottom) of the rail.
For a full installation manual, here are a few steps you can take:
The full installation manual typically covers the following key stages: