This usually indicates a Poor Connection or a Reverse Polarity error (you have the clamps on the wrong posts). 4. Charging Times Because this is a 1.5-amp charger, it is slow by design.
If LEDs act erratic: unplug AC power, disconnect both clamps, wait 5 minutes, then restart. This clears internal logic errors.
If applicable, check battery fluid levels and add distilled water as specified by the battery manufacturer. Step 2: Choose Your Connection Type autocraft 1.5 amp battery charger manual
, designed for 12V lead-acid batteries, including AGM, gel, and deep-cycle types. ⚠️ Safety Precautions
Switch the clamps to the correct terminals. Clean rust or dirt off the battery posts to ensure metal-to-metal contact. Specifications Input Voltage: 120V AC, 60Hz Output Voltage: 12V DC Charging Current: 1.5 Amps This usually indicates a Poor Connection or a
Connect the clip to the ungrounded negative battery post.
Most AutoCraft 1.5A models (e.g., part number 00-99-000147) use , not a digital screen. Here’s the layout: If LEDs act erratic: unplug AC power, disconnect
Usually includes both battery clamps (for temporary use) and ring connectors (for permanent attachment). 3. Operating Instructions Charging a Battery Inside the Vehicle Turn off all vehicle accessories and lights.
Check the outlet breaker. Plug a different device into the outlet to verify power. Reverse polarity connection