Checkpoint Usb-c Console Driver !full! Jun 2026

Note: Because Check Point utilizes industry-standard Silicon Labs CP210x or FTDI bridges, downloading the latest generic drivers directly from the Silicon Labs or FTDI websites will also work perfectly and often provides better compatibility with newer OS updates. Step-by-Step Installation Guide Windows 10 and Windows 11

A: Yes, as long as your PC has USB-A and you have a USB-A-to-C cable that supports data. Avoid cheap "charge-only" cables.

Maintain a travel kit containing a high-quality, shielded USB-C to USB-A cable, a USB-C to USB-C cable, and a standard RJ45 console cable with an adapter.

| Parameter | Value | | ------------- | ------- | | Baud Rate | 115200 | | Data Bits | 8 | | Parity | None | | Stop Bits | 1 | | Flow Control | None | checkpoint usb-c console driver

Plug the USB-C cable into the Check Point appliance and your laptop. Open Device Manager and expand the Ports (COM & LPT) section. You should see an entry like Silicon Labs CP210x USB to UART Bridge (COMx) . macOS Installation Steps

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Log into the Check Point SupportCenter (UserCenter). Search for the specific SK (Solution Knowledge) article associated with your hardware model (e.g., SK115933 or SK179483). These pages host verified zip files of the drivers. Maintain a travel kit containing a high-quality, shielded

Traditional console ports (RJ45 serial or DB9) are being phased out in favor of USB-C due to its reversibility, higher bandwidth, and support for multiple protocols. In security appliances (e.g., firewalls from Check Point Software) and custom embedded systems, a checkpoint console is a dedicated interface used to pause system execution, dump state, or enter recovery mode before booting the main OS.

Download the .zip driver archive from Check Point or Silicon Labs and extract it to a local folder.

Open the .dmg file and run the installer package inside. Allow System Extension: You should see an entry like Silicon Labs

Connect the USB-C end to the appliance and the USB-A/C end to your computer.

3000, 6000, 7000, 16000, and 26000 models.