: Inside the P-0 sub-menu, use the [+] and [-] keys to scroll through and select one of the five operating modes ( F-01 to F-05 ) described in the table above.
If you need more help tailoring this device to your specific system, let me know:
Relay pulls in when voltage > P1. Relay disconnects when voltage < P2.
This article provides a complete overview of the DVB01 user manual, including configuration, features, and operating procedures. 1. DVB01 Module Overview dvb01 user manual
: The detection voltage input ground line ( GND ) is not tied to a common negative return line shared with the monitored power source. Ensure clean solder joints or terminal connection blocks.
The DVB01 menu system is designed to be intuitive and user-friendly. Here's a brief overview of how to navigate through the menus:
To listen to a specific frequency (e.g., a local weather station or ham radio repeater), you must store it in a channel. : Inside the P-0 sub-menu, use the [+]
DC 0.0V to 99.9V or 0.0V to 11.0V (Depending on firmware version) Measurement Accuracy Relay Contact Capacity AC 250V / 10A; DC 30V / 10A Operating Temperature -20°C to 60°C (Non-condensing) Physical Dimensions 67mm × 44mm × 20mm (L × W × H) Terminal Interface and Layout
The following specifications are commonly cited by manufacturers and technical guides:
Answer: Its measurement accuracy is less than 0.1V. The DVB01 menu system is designed to be
Use the button to alter the flashing digit value and the SWI button to advance to the next digit.
Without the original dvb01 user manual, the OSD menu can be cryptic. Here’s what each setting does.