Have the driver folder ( Driver_EZP2010v3_x86_x64 or similar) ready from the CD that came with the device, or download the latest version.
This incompatibility stems from two primary factors:
The EZP2010 is a highly reliable, budget-friendly USB high-speed EEPROM and Flash programmer. It is widely used for repairing motherboards, flashing BIOS chips, and servicing consumer electronics. However, because the hardware was designed during the Windows XP and Windows 7 eras, getting the EZP2010 to work on Windows 10 can be challenging.
The EZP2010 uses the parallel port / SPI chip. Download the latest official driver from WCH: Ezp2010 Programmer Driver Windows 10
Your computer will now boot into Windows 10 normally, but with the restriction temporarily lifted until the next restart. Step 3: Install the Driver via Device Manager
EZP2010 Programmer Driver for Windows 10: Complete Installation Guide
Open , find the "Unknown Device" (often listed under Silicon Labs Software), right-click it, and select Update driver . However, because the hardware was designed during the
After your PC restarts, choose > Advanced options > Startup Settings > Restart .
With driver signing disabled, you can now force Windows 10 to recognize the programmer hardware.
There isn't a single official website for the Ezp2010, but the drivers are widely available through electronics forums and repositories. Step 3: Install the Driver via Device Manager
If you cannot find the CD, search for "EZP2010 Driver Windows 10" and download the zip file, ensuring it includes x64 drivers.
Type the following command and press Enter: bcdedit /set testsigning on
Type the following command and press Enter: bcdedit /set nointegritychecks on
: The download is typically a .zip or .rar file. Extract it to an easily accessible location, such as your Desktop, using WinRAR or 7-Zip.
Before diving into drivers, it is crucial to understand what you are working with. The Ezp2010 is a parallel port legacy device emulated via a USB chip (often the WCH CH551 or CH552). Unlike modern programmers that use standard HID or WinUSB drivers, the Ezp2010 relies on custom USB-to-parallel bridging.