Bionix Prime Fit Exercise Bike Manual ((new))

The Bionix Prime Fit features an intuitive console designed to track performance metrics and deliver varied workouts. Metric Displays

The Bionix Prime Fit Exercise Bike is covered by a 1-year limited warranty on parts and labor. For more information, please refer to the warranty card included with your bike.

Attach the handlebars to the post clamp, adjust the tilt angle to your liking, and fasten tightly using the T-knob or hex bolts. Step 5: Connect the LCD Console Remove the screws from the back of the LCD console. Bionix Prime Fit Exercise Bike Manual

Estimates the total energy burned based on average resistance metrics.

Check that the pulse wire connector is plugged completely into the back of the monitor. Problem: The bike makes a squeaking or clicking noise. The Bionix Prime Fit features an intuitive console

The bike does not require electricity; resistance is generated by your pedaling speed, which powers an internal fan wheel that also provides cooling.

Insert the seat post into the frame and secure it with the adjustment knob. Most models allow for height adjustments by pulling the knob, sliding the post, and releasing it into a pre-drilled hole. Handlebars & Console: Feed the console wire through the handlebar upright. Attach the handlebars to the post clamp, adjust

Stand next to the bike. The seat cushion should align perfectly with your hip bone. When sitting on the saddle with your foot at the lowest point of the pedal rotation, your knee should have a slight bend of roughly 15 to 20 degrees. Horizontal Seat Position

Verify that the batteries are properly installed and have adequate charge.