Located just ahead of the eyepiece. Rotate this to change your zoom level from 3x to 9x.
Illuminated Rangefinder / Mil-Dot (Red and Green settings).
Before adjusting your optic, familiarize yourself with its physical components from back to front:
Unscrew the cap on top of the illumination dial. Insert a standard CR2032 3V lithium coin battery with the positive (+) side facing up. Replace the cap firmly. bushnell 3-9x40eg manual
Controls the horizontal adjustment (left/right) of your impact point.
This comprehensive guide serves as an unofficial manual to help you mount, zero, and maintain your for peak performance in the field. 1. Key Specifications
The lens closest to your eye. It contains the diopter adjustment ring to focus the reticle. Located just ahead of the eyepiece
Turn the top elevation turret counter-clockwise (following the "UP" arrow direction).
Before firing, perform a mechanical bore sighting. Remove the bolt from an unloaded bolt-action rifle, look down the barrel at a target 25 yards away, and adjust the scope turrets until the crosshairs sit on the exact same target center. Step 2: Live Fire Adjustment Set up a large target safely at 25 yards.
Source:
The defining feature of the "EG" model is its dual-color illuminated reticle, which helps you see the crosshairs against dark targets or during low-light dawn and dusk conditions. Battery Installation Locate the dial on top of the eyepiece housing.
Tighten the ring cap screws evenly in a cross-pattern (like changing a car tire). Do not over-tighten, as crushing the scope tube will freeze the internal components. Use standard gunsmithing torque specs (usually 15-20 inch-lbs). 4. Focusing and Reticle Adjustment
Tighten the top halves of the rings in a diagonal pattern, ensuring even pressure. Do not over-tighten, or you may damage the tube. 3. Reticle Focusing (Diopter Adjustment) Before shooting, you must focus the reticle to your eye: Before adjusting your optic, familiarize yourself with its
Proper mounting is critical for safety, accuracy, and maintaining consistent eye relief. Step 1: Install Base and Lower Rings