Press to modify values during programming or to scroll through parameter codes.
Splits each day into 30-minute blocks, identifying them as active, monitor, or standby based on real-time motion data. Soft Start Sequence:
: For advanced users, the manual might delve into programming features, such as: elstat ems 55 advanced user manual new
If the display shows 3.0°C but the cabinet is actually 4.0°C, adjust CA1 value to +1.0 . Defrost Configuration
When you plug in the cabinet, the controller runs an automated startup sequence to ensure voltage stability and component safety: Press to modify values during programming or to
: Commonly used across Coca-Cola Parts distribution pipelines. It replaces the Elstat single-appliance probe format with a dual-probe approach (cabinet and evaporator sensors). This swap requires identifying the 115VAC hot line (pink wire) to safely deliver uninterrupted power to the new condensing hardware.
When the system detects zero activity for a pre-defined period (typically 2 hours), it transitions into Saving Mode. Defrost Configuration When you plug in the cabinet,
Press and DEFROST simultaneously to display rEL . Use these controls to force-activate relays: DOWN Button : Powers the evaporator fan. UP Button : Toggles the cabinet lights. SET Button : Forces the compressor relay to fire. Step 3: Verify Sensors & Motion Detector
: Ensure the appliance sensor is not touching the evaporator coils, as this will give false "cold" readings.
