Since you asked to "provide a feature" — I’ll assume you mean for this error. Below is a step-by-step troubleshooting guide.
If the TV does not automatically start scanning, press the or Menu button on your remote.
The occurs when the TV's software attempts to process a signal stream that does not match the configured input mode. For example, if the TV is internally set to expect a "Cable" (DVB-C) signal stream but is receiving a "Terrestrial" (DVB-T/Antenna) frequency packet, the tuner cannot decode the service information (SI) tables, resulting in this specific error prompt.
The internal tuner inside the Samsung TV might be faulty. dvb select type error samsung tv
: If the TV is set to an external source (like HDMI or an app) while trying to access broadcast menus, those options may be grayed out or unavailable. Signal Changes
The on a Samsung TV indicates that the television is unable to decode broadcast channels because the internal Digital Video Broadcasting (DVB) tuner configuration does not match the incoming aerial, cable, or satellite signal type. This specific error commonly happens during an Auto Program or Auto Tuning setup loop or when regional broadcast standards shift.
: Changes in local over-the-air compression standards can make older DVB internal tuners temporarily bug out unless refreshed. Step-by-Step Fixes for the DVB Select Type Bug Since you asked to "provide a feature" —
Fixing the "DVB Select Type" error on a Samsung TV requires adjusting the broadcasting signal settings in the channel setup menu. This error typically occurs when the television's internal tuner is configured to search for the wrong type of incoming digital signal.
If none of the above steps work, a factory reset will restore the TV to its original out-of-the-box settings. This clears deep software conflicts but will erase your downloaded apps and calibration settings. Go to > General & Privacy > Reset . Enter your PIN (the default security PIN is 0000 ). Confirm the reset and allow the TV to reboot.
DVB stands for Digital Video Broadcasting. It is the international standard for digital television. Your Samsung TV displays this error when its internal tuner experiences a software glitch or receives a corrupted signal. Step 1: Perform a Cold Boot The occurs when the TV's software attempts to
The screen flickered. The Service Menu vanished.
When prompted for the broadcast type, ensure you choose the correct option for your setup: