Locate the setting named PARAMETER WRITE (PWE) . Change the value from 0 to 1 .
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
For the Fanuc 10T, parameters are not just "settings"—they are the control's operating system configuration. They define: Fanuc 10t Parameter Manual
This indicates that the background memory containing the parameters has corrupted—often due to a dead backup battery. You must clear the memory, restore the master parameters from your backup file, and replace the batteries (usually 3V or 4.5V cells located on the master board) while the control is powered on. Conclusion
Set your PC's DNC software to "Send mode" and select your parameter file. Locate the setting named PARAMETER WRITE (PWE)
: Includes settings for the Reader/Puncher interface, spindle control, servo tuning, and axis limits. Prefeitura de Aracaju 2. Core Configuration Categories Parameters are divided into specific functional groups:
Used for advanced troubleshooting, such as clearing memory or entering option parameters (9000-series). Access this by powering up the machine while holding the "-" (minus) and "." (decimal) keys. This link or copies made by others cannot be deleted
– Customizing the operator interface.
Use the PAGE and CURSOR keys to find the desired parameter number. Edit the Value: Type the new value and press the INPUT key.