 Cargando ... |
Cargando ... |
If you cannot access the Unraid WebGUI or connect via SSH, you must physically access the Unraid USB boot flash drive to clear the network configuration. Step 1: Power Down Safely
What or behavior caused the lockout? (e.g., page timeout, incorrect subnet change)
Safely eject the USB drive, place it back into your Unraid server, and power it on. It will now default to DHCP.
If your server has a monitor and keyboard attached (or you are using IPMI/iLO): to the Unraid console using your root credentials. unraid reset network settings install
: A reboot is mandatory for the changes to take effect and for the OS to generate the new default files . Alternative: GUI Boot Mode
Part 1: The Quick Fix — How to Reset Unraid Network Settings
Deleting network-rules.cfg solves issues where Unraid believes the network interface's MAC address has changed. If you cannot access the Unraid WebGUI or
Before you begin:
: If you have multiple NICs, the default installation typically enables "Bonding." If your switch does not support LACP/802.3ad, you may need to disable bonding in the Unraid Network Settings to regain stability. or setting up a static IP reservation in your router? UNRAID Setup Guide. PLUS! Intro to Docker Apps and VM's!
If you have the Unraid Connect plugin linked to your account, check the Unraid cloud dashboard to view the online status and local IP of your machine. Re-establishing Best Practices It will now default to DHCP
Open the terminal terminal (either via the local GUI web browser or directly on the monitor screen) and type the following commands:
Since you cannot access the WebGUI, you'll need direct access to the server's physical console (the monitor and keyboard attached to the server itself) or SSH access if it's still available.
The server will shut down and reboot with default network settings.