This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
: Inside the USB housing of the LD-C101 sits a bridge chipset. This chip converts standard USB data packets into the asynchronous serial data stream required by Icom's 3.5mm mono CI-V ports.
The LD-C101 USB to CI-V driver offers several features and benefits, including:
Highly reliable, handles timing beautifully, and Windows often installs the drivers automatically.
Unplug the cable, run the installer program, and restart your computer if prompted. Plug the LD-C101 cable back in. Configuring Amateur Radio Software for the LD-C101 Ld-c101 Usb To Ci-v Driver
It is just a driver. But in the age of instant gratification, a driver that makes you work for a connection is a kind of teacher. It whispers: Nothing truly communicates without a little suffering. And then it hands you the frequency, and you call CQ, and the ionosphere answers.
This can be caused by USB power management settings.
To the computer's operating system, the cable looks like a standard serial COM port. This virtual port allows ham radio software to send and receive frequency, mode, and VFO data smoothly. Why the Correct Driver Matters
: Many Icom-specific cables can also use the official Icom USB Driver which supports Windows 10 and 11. USB Cable Drivers FTDI / Prolific / SiLabs / WCH - Miklor This public link is valid for 7 days
The
If your driver looks healthy in Device Manager but the software cannot see the radio, the issue usually lies in the hardware line or configuration settings.
uses the CH340 chipset, you must install the corresponding for your computer to recognize it as a COM port.
Plug the USB end of the LD-C101 into an available port on your computer. To verify the installation: Can’t copy the link right now
Close all other radio tools, unplug the USB cable for 10 seconds, re-insert it, and restart your logging application. High RF Interference (RFI) Disconnections
While it handles "CAT control" (frequency and mode changes) perfectly, it does not typically pass audio or control the PTT line on its own; you'll still need an audio interface (like a SignaLink or the radio's built-in USB audio) for digital modes. Driver & Installation Guide
Tip: If your radio has a "CI-V Transceive" option in its internal menu, turning it allows the radio to instantly update the software when you turn the physical VFO knob. Troubleshooting Common Driver Issues
Head to the official FTDI Chip website and navigate to the page.
Download the latest Virtual COM Port (VCP) drivers from the official FTDI website. 2. Connect the Cable