While the full composition is proprietary, technical specifications for Nalco 8506 indicate a consistent set of physical parameters.
Use equipment made of PVC, PE, Teflon, or Stainless Steel .
: Immediately flush eyes with plenty of water for at least 15 minutes; seek medical attention if irritation persists. Skin Contact : Wash thoroughly with soap and water. Inhalation : Move to fresh air.
Causes serious eye damage . Direct contact with the neat (undiluted) product can trigger extreme redness, intense pain, and chemical corrosion of ocular tissue. Immediate rinsing is necessary to prevent permanent damage. nalco 8506 plus msds
is specifically formulated as a high-performance and non-biocidal dispersant. It functions by penetrating slime and silt deposits, allowing biocides to better reach hidden microorganisms.
Nalco 8506 Plus is typically an aqueous (water-based) solution, meaning it is not inherently flammable. However, if involved in a surrounding fire, the water will evaporate, and the residual organic materials may decompose. Use water spray, carbon dioxide ( CO2cap C cap O sub 2
Use water spray, alcohol-resistant foam, dry chemical, or carbon dioxide. Skin Contact : Wash thoroughly with soap and water
NALCO 8506 PLUS is a liquid chemical reagent manufactured by , a subsidiary of Ecolab . According to its State Registration Certificate in Russia, the product is manufactured by "Ecolab Europe GmbH" and its affiliated factories across the globe, including facilities in Switzerland, the Netherlands, France, Germany, China, and the USA.
Nitrile, neoprene, or PVC gloves should be worn alongside chemical-resistant aprons or suits.
To maintain occupational safety standards, plants should implement a reliable safety hierarchy. Engineering Controls Direct contact with the neat (undiluted) product can
. Prolonged inhalation of vapors may be harmful, and ingestion can lead to central nervous system depression, nausea, and dizziness. Material Compatibility
: It is safe to use with equipment made of PVC, PE, Teflon, or Stainless Steel. However, it should
Storage tanks, transfer lines, and dosing pumps must be constructed of PVC, Polyethylene (PE), Teflon, or Stainless Steel .
Prolonged or repeated exposure can cause irritation or dermatitis.