Watch the PC screen; the tool should display a "Connect Success" message and a progress bar will appear.
The software should immediately detect the bootloader of the meter, and a progress bar will appear on your PC screen indicating that data transmission has started. Step 4: The Flashing Process
on the device and select "Software Update" or "Upgrade" .
Go to to verify that the software version date reflects the new update. 🔍 Troubleshooting Common Errors Target Not Connect / No Response Error Cause : Incorrect COM port selection or timing issue. satlink ws-6906 software upgrade
Right-click the Satlink upgrade tool ( Upgrade.exe ) and select .
: Connect the RS-232 cable to your PC and the Satlink WS-6906 . Ensure the device is turned on .
I can provide direct links or configuration details for your specific setup. Watch the PC screen; the tool should display
Match your exact firmware download to these numbers. Flashing software meant for a different hardware revision will corrupt the bootloader. Step 2: Setting Up the PC Connection
Automatically populates current satellite frequencies and symbols.
Follow these steps precisely to flash the new software onto your satellite finder. Step 1: Connect the Hardware Ensure the Satlink WS-6906 is powered . Go to to verify that the software version
If you encounter issues during the firmware flash, use these quick fixes to resolve them:
You will need a serial RS-232 to USB cable (or a native serial cable) to connect the meter to a PC.
. Once finished, the meter will automatically restart to apply the new software. Updating Satellite Data (Optional)
(Usually included with the device). Note: Ensure you have the necessary drivers installed on your PC for the USB-to-Serial converter. A PC running Windows.