Multi-platform graphical tool for working with Firebird databases
Created by members
of the Firebird community
Product on the market
Experience in DBMS development
Supports all versions of Firebird database
Supports English
and Portuguese
Tools for database analysis and optimization
Runs databases > 1TB
Works on Linux, Windows, MacOS, Android operating systems
Try our app completely free of charge and enjoy all its features
Ross-Tech does not support cloned interfaces. Using a clone deprives you of firmware updates, official support, and can potentially damage your vehicle’s modules. This article is for educational purposes regarding driver behavior.
Port Status: OK USB Library Version: 03.02.07 (or similar) USB Driver Version: 02.10.00 Interface: Found! Type: Ross-Tech [Your Interface Type] Version: 1.96 Status: Ready K1: OK K2: OK CAN: [Supported/Not Supported]
: Built primarily for 32-bit and 64-bit Windows operating systems. vcds usb driver version 02.10.00
Follow the on-screen prompts until you reach the screen.
: If you see "USB Interface Not Found," ensure you are not running Windows in " S mode ," which blocks third-party driver installations. Ross-Tech does not support cloned interfaces
Running VCDS inside VirtualBox or VMware with driver 02.10.00 often fails due to direct hardware access limitations. Use a native Windows boot or a dedicated old laptop.
Hold down the while clicking Restart in the Windows Start Menu. Port Status: OK USB Library Version: 03
First, eliminate simple physical problems. Ensure your diagnostic interface is fully connected to the vehicle's OBD-II port, not using USB hubs or extension cables, and check for power. Many Ross-Tech interfaces have an LED that lights up when connected to a car with the ignition on. Plug directly into one of your computer's main USB ports.
For automotive enthusiasts, professional mechanics, and Audi/Volkswagen Group (VAG) specialists, is nothing short of a digital wizard. It unlocks the full potential of your vehicle’s onboard computer, allowing you to diagnose faults, activate hidden features, and perform advanced adaptations.
Click to let Windows locate and install version 02.10.00. Troubleshooting Common Driver Issues
Stop working in the terminal by switching to a graphical tool
Ross-Tech does not support cloned interfaces. Using a clone deprives you of firmware updates, official support, and can potentially damage your vehicle’s modules. This article is for educational purposes regarding driver behavior.
Port Status: OK USB Library Version: 03.02.07 (or similar) USB Driver Version: 02.10.00 Interface: Found! Type: Ross-Tech [Your Interface Type] Version: 1.96 Status: Ready K1: OK K2: OK CAN: [Supported/Not Supported]
: Built primarily for 32-bit and 64-bit Windows operating systems.
Follow the on-screen prompts until you reach the screen.
: If you see "USB Interface Not Found," ensure you are not running Windows in " S mode ," which blocks third-party driver installations.
Running VCDS inside VirtualBox or VMware with driver 02.10.00 often fails due to direct hardware access limitations. Use a native Windows boot or a dedicated old laptop.
Hold down the while clicking Restart in the Windows Start Menu.
First, eliminate simple physical problems. Ensure your diagnostic interface is fully connected to the vehicle's OBD-II port, not using USB hubs or extension cables, and check for power. Many Ross-Tech interfaces have an LED that lights up when connected to a car with the ignition on. Plug directly into one of your computer's main USB ports.
For automotive enthusiasts, professional mechanics, and Audi/Volkswagen Group (VAG) specialists, is nothing short of a digital wizard. It unlocks the full potential of your vehicle’s onboard computer, allowing you to diagnose faults, activate hidden features, and perform advanced adaptations.
Click to let Windows locate and install version 02.10.00. Troubleshooting Common Driver Issues