Kes Geyser Load Control Timer Manual New -

Do you need assistance figuring out how to set up ?

This comprehensive manual covers the technical specifications, physical layout, step-by-step programming instructions, and troubleshooting guidelines for the new model. 1. Product Specifications and Technical Data

Disconnect the existing load wires feeding the geyser isolator switch from that circuit breaker. kes geyser load control timer manual new

It is typically wired between the geyser circuit breaker and the geyser itself, allowing the controller to interrupt power based on the programmed schedule. Operating Instructions Set Time/Date

: OFF from 08h00 to 15h00 and OFF during standard peak times; ideal for solar geyser setups. Do you need assistance figuring out how to set up

The geyser is OFF during specific blocks: 00:00–03:00, 08:00–15:00, 20:00–24:00, and during standard weekday peak times. Manual Features & Indicators

Do not exceed the maximum rated current load of the timer. If your geyser draws more than the rated amperage, you must install a separate contactor. The geyser is OFF during specific blocks: 00:00–03:00,

If you need hot water outside of your selected program's schedule, you can use the feature.

: To check if the Real Time Clock (RTC) is correct, hold the

Knowledge is power (and money in your pocket). Check the manual, set the times, and watch the savings stack up!

There are many benefits to using a Kes Geyser Load Control Timer, including: