The firmware update for the LinkRunner 2000 offers several benefits, including:
Power off the LinkRunner AT, then press and hold the Volume Up and Power buttons simultaneously until the Recovery screen appears.
Open Windows Device Manager. Look for any yellow exclamation marks near USB controllers. Reinstall the LinkRunner AT Manager to refresh the drivers. linkrunner at 2000 firmware update
Improves AutoTest speeds, Link-Live cloud sync reliability, and cable test accuracy.
You need a Link-Live.com account to download the manager software and firmware files. The firmware update for the LinkRunner 2000 offers
The current version (e.g., v2.4.3 or v2.5.4) will be displayed on the screen.
The main menu loads. But it’s different. The font is cleaner. The icon now has a "PoE+" label next to it. Reinstall the LinkRunner AT Manager to refresh the drivers
If your workstation lacks internet access or firewall rules block the LinkRunner Manager from contacting NetAlly servers, you can perform a manual update.
Once restarted, navigate back to > Version Information to confirm that the new version number matches your download. Troubleshooting Common Update Failures
There are two primary methods for updating the firmware on your LinkRunner AT 2000: the (via PC) and the Over-the-Air (OTA) method via the Link-Live cloud service. It is important to note that only the manual method is available for the LRAT-2000 , as this model cannot be updated directly via the Link-Live Cloud Service.