This will close in 0 seconds
Improper installation is the leading cause of premature compressor failure. The manual emphasizes several critical environmental and mechanical requirements. Location and Space Requirements
The Sumitomo F50 is a compact industrial air compressor designed for workshop and light industrial applications. It provides reliable compressed air for pneumatic tools, painting, and general workshop use. Typical features include a cast-iron pump, belt-driven motor, pressure regulator, safety valve, and oil-lubricated operation for durability.
Before installing or operating the Sumitomo F50, you must verify that your facility meets the utility requirements outlined in the official technical manual. Failing to meet these specifications can cause permanent damage to the compressor capsule or result in insufficient cooling performance. Electrical Specifications sumitomo f50 compressor manual
Stay informed, stay safe, and get the most out of your Sumitomo F50 compressor!
Slowly open the valve to add gas until the static pressure reaches the specified level on the front-panel gauge. Improper installation is the leading cause of premature
: Approximately 591 x 450 x 585 mm; weighs roughly 120 kg (264 lbs) Maintenance Cycle
: Strict instructions on the minimum bending radius of flex lines (300 mm) to avoid gas leaks or explosive failures. Power Requirements It provides reliable compressed air for pneumatic tools,
: Water-cooled with a flow rate of 4.0–10.0 L/min and an inlet temperature of 4–28°C Dimensions & Weight
The F-50 requires three-phase power. Verify the voltage matches the specific model (high or low voltage).
Proper installation is crucial for safe and efficient operation.
This will close in 0 seconds