Foxconn N15235 Motherboard Front Panel Connectors [work] -
These connectors are usually located on the motherboard's front panel header, which is typically situated at the front of the computer case.
Top Row: [ HD_LED+ ] [ HD_LED- ] [ PWR_SW ] [ PWR_SW ] [ EMPTY ] (Pin 1) (Pin 3) (Pin 5) (Pin 7) (Pin 9) Bottom Row: [ MSG_LED+][ MSG_LED-] [ RST_SW ] [ RST_SW ] [ DUMMY ] (Pin 2) (Pin 4) (Pin 6) (Pin 8) (Pin 10) Use code with caution. Pin-by-Pin Breakdown Pin Number Signal Name Description Wire Polarity Hard Drive Activity Light (Positive) Colored Wire (usually Red/Green) Pin 3 Hard Drive Activity Light (Negative) White or Black Wire Pin 5 Power Switch (Button) No Polarity (Either way) Pin 7 Power Switch (Ground) No Polarity (Either way) Pin 9 No Pin Key / Empty Slot Pin 2 Power LED / Message Light (Positive) Colored Wire (usually Green/Blue) Pin 4 Power LED / Message Light (Negative) White or Black Wire Pin 6 Reset Switch (Button) No Polarity (Either way) Pin 8 Reset Switch (Ground) No Polarity (Either way) Pin 10 Not Connected / Extra Pin Step-by-Step Connection Instructions
Reset Switch (RESET) . This connects the case's reset button. Pin 5: This pin is usually empty (NC). Leo’s Three Golden Rules foxconn n15235 motherboard front panel connectors
Even though power switches are usually non-polar, try flipping the connector 180 degrees just in case.
To rule out a broken case button, unplug the PWR_SW cable. Gently touch a metal screwdriver tip to both Pin 6 and Pin 8 simultaneously for one second. If the system fans spin up, your motherboard works perfectly, and either your case button is broken or the wire was connected incorrectly. These connectors are usually located on the motherboard's
Pin 10 is often missing (no pin). This is the key – align the connector’s blocked hole here.
Because "N15235" applies to many models (such as the G31MX, G41MX, or H61 series), the front panel header layout can occasionally vary. However, the vast majority of these boards use a standard Intel-style (often inside a 10-pin grid with one missing key pin). Locating the Front Panel Header (JFP1 / F_PANEL) This connects the case's reset button
A: Possibly, but check the pinout. Many OEM cases (Acer, Dell) use proprietary block connectors that are not compatible. You may need to cut the block and separate the wires.
The power switch is the most critical connection. Without it, your computer will not turn on when you push the case button.
Computer cases come with a bundle of thin black wires ending in small 1-pin or 2-pin plastic connectors. Follow this order to install them properly: 1. Identify Wire Polarity (Positive vs. Negative)