Universal Transmitter Quick Start Guide [exclusive] | Xnx

Ensure the enclosure is perfectly vertical to maintain the integrity of the weatherproofing and to allow proper drainage through the conduit entries. 3. Electrical Connections and Wiring

You perform a quick "bump test" by applying a known concentration of gas. The transmitter displays the reading, confirming the pre-calibrated sensor is communicating correctly with the main board without needing a full span calibration. Key Quick-Start Specifications Power Supply 16 to 32 VDC (sensor dependent) Communication 4-20mA with HART (standard); Modbus or Fieldbus (optional) Display Backlit LCD with text, bar graphs, and status icons Mounting Surface lugs, pipe mount (2–6"), or ceiling bracket Operating Temp -40°C to +65°C (-40°F to +150°F) Important Maintenance Tips

: Re-attach the housing cover, turning it clockwise until tightly sealed. Tighten the security catch screw. User Interface and Basic Operation Xnx Universal Transmitter Quick Start Guide

If you need help troubleshooting specific errors during your setup, please let me know:

: The transmitter operates on a DC supply ranging from 16 to 32 VDC (EC and mV versions) or 18 to 32 VDC (Searchpoint Optima Plus and Searchline Excel). Ensure the enclosure is perfectly vertical to maintain

Unscrew the weather-proof cover using the supplied hex key tool.

Based on the XNX Universal Transmitter Quick Start Guide User Interface and Basic Operation If you need

Wait for the reading to stabilize, then swipe to accept the new zero point. Step 2: Span Calibration

Diagrams for terminal blocks, DIP switch settings, and LED status indicators are well-labeled and easy to follow. The use of color coding (e.g., red for power, black for ground) matches common field wiring practices.